Wall, floor, roof panels
These large-size Termalica panels manufactured of reinforced aerated concrete are foreseen for the erection of ceilings and walls in single- and multi-family housing construction, as well as industrial and public buildings. The use of precast, custom-made Termalica Sprint panels and the elimination of any sort of formwork and support systems markedly reduces construction time.
Termalica SPRINT wall panels
The large-size Termalica sprint wall panels, made of reinforced aerated concrete, are used for the erection of protective outer walls and internal divider walls at industrial, retail and commercial sites.
The reinforced Termalica wall components are mounted to a building support structure made of precast steel or reinforced concrete transoms or pillars. Depending on the designed structural solution, the panels can be mounted in the outside, inside, or between pillars. The wall panels are fixed to the framework support structure using a system of connectors and anchors, depending on the support type.
The maximum spacing of load-bearing structural components is six metres. Termalica wall components are manufactured of reinforced aerated concrete to resistance class AAC 4 and density of 600 kg/cu m.
The wall components are manufactured in two versions: with an interlocking tongue and groove profile and a smooth profile.
TPO4 wall panels 600/15
TPO4 wall panel 600/17,5
TPO4 wall panel 600/20
TPO4 wall panel 600/24
TPO4 wall panel 600/30
Termalica SPRINT floor panels
Large-size Termalica ceiling panels, made of reinforced aerated concrete, are foreseen for the execution of ceilings in single- and multi-family residential construction, as well as in industrial and public sites.
The used of pre-cast, custom-made Termalica ceiling panels, as well as the elimination of formwork and assembly supports, markedly reduces the time of execution of a ceiling as compared to other technologies and ceiling systems.
The ceiling panels are laid out on the construction walls on a layer of Termalica adhesive mortar, and afterwards the specially profiled locking elements on the lengthwise sides of the panels are reinforced with 8-mm steel rods and filled with concrete together with wall cornices.
Ceilings made of Termalica panels require no process joints and can be loaded directly after conclusion of assembly, permitting further bricklaying or other work on subsequent storeys.
Termalica ceiling panels are manufactured of reinforced aerated concrete to resistance class AAC 4 and density of 600 kg/cu m.
The minimum support length a0 of panels on supports – masonry, reinforced concrete and steel structure: 9 cm.
Termalica SPRINT TPS4 floor panel 600/24
Termalica SPRINT TPS4 floor panel 600/30
Termalica SPRINT roof panels
Large-size Termalica roof panels, made of reinforced aerated concrete, are foreseen for the execution of ceilings in single- and multi-family residential construction, as well as in industrial, retail and public sites.
The Termalica reinforced roof panels can be laid out on a wall, reinforced concrete structure or steel structure, creating a flat or inclined roof.
The used roof panels in residential housing construction permits the forgoing of use of traditional wooden roof A-frames. The panels rest on the building’s load bearing walls. On the panels in turn, typical roof cladding is placed: humidity insulation, wooden battens of ca. 5 x 15 cm, between which thermal insulation is installed, to be followed by wind-resistant film, and battens in a cross arrangement, to be followed by metal sheet tiles or ceramic tiles.
In case of structures with a pillar and transom structure made of precast steel or reinforced concrete components, the panels are laid out on roof battens and fixed to the structure by special connectors or a series of anchor rods.
The roof panels have a profiled side surface with a special filler inlet, foreseen for the placement of rebar and filling with concrete. On the inside, the panels can be plastered, clad in plasterboard or left unfinished (or just painted), with visible partitions into individual components and filling of lengthwise joints with a permanently elastic material.
Thanks to good thermal insulation properties and high thermal inertia, the use of Termalica panels ensures an appropriate atmosphere inside the rooms.
Termalica SPRINT TPD4 roof panel 600/24
Termalica SPRINT TPD4 roof panel 600/30